Свершилось!!!
Наконец-то выложили в свободный доступ прошивку для X9.
Note COWON Media Center- JetAudio can easily convert or rip your files to compatible files Внимание Добавлена совместимость с JetAudio при конвертации файловОписание изменений как таковое отсутствует, т.к. это первая прошивка
Собственно, главное, что появилась сама прошивка. А значит появилось больше вариантов по "реанимации" девайса.
Прямая ссылка: http://www.cowonglobal.com/download/Fir ... 2.02_2.zipЗеркало на иПапку: Инструкция по прошивке элементарная, но все же напомню: Warning/CautionThe battery must be fully charged before upgrading firmware.
Do not press the reset button during upgrading.
Backup any important files from COWON X9 to your computer before upgrading.
You must upgrade the supplied firmware from COWON SYSTEMS.
Please read notes before install the firmware.1.Please back up your data.
2.Please make sure the battery is charged enough for upgrade.
3.Please do not press the reset button the device while it is upgrading.
4.Please make sure you are disconnecting device with "safely remove hardware" for safely disconnect your device and PC.
Download the firmware file in your PC and unzip it. Connect COWON X9 to PC via USB cable. Copy and paste the firmware file to the root folder of the device. Click “safely remove hardware” icon in the tray at the lower right corner of your computer screen to disconnect the device from the PC. Please check settings > system > information to firmware upgrade is done correctly. You can check firmware version on Settings > System > Information.